SAPO-34 Zeolite Phosphorus Aluminum Silicate Catalyst Small Pore

Crystal structure of SAPO-34, which is a micro pore zeolite, is similar to chabazite, have special water absorbing capacity and bronsted acidity. So this type could be used as adsorbent, catalyst and catalyst support in low carbon olefin transfer, auto gas purification, MTO reactions, etc.

SAPO-34 zeolite as catalyst for MTO ( methanol to olefin)

Chemical formula: [Ca2+6 (H2O)40] [Al12Si24 O72]-CHA

Channels: SAPO-34 is a zeolite with a chabazite class structure. Si-Al-phosphate is its skeleton’s primarycomponent. This zeolite contains six-membered ring and eight-membered ring pairs as well as afour-membered elliptical cross-CHA cage and a three-dimensional pore structured ring.

Features and Applications: Used in Refining and Specialty Chemicals markets- shape selectibe catalyst, e.g. (MTO)methanol to olefin Environmental area - catalyst carrier of exhaust purification Drying, purification and seperation area.

SAPO-34 zeolite Spec:
Mean size:1.5µm
Aperture:0.4nm
Specific surface area:570m2/g
Pore volume:0.278cm3/g

Our zeoite and catalyst factory are in follow.

The fixed-bed catalyst production project covers an area of about 5,000 square meters and a building area of 2,000 square meters. It is fully equipped with public works and has more than 40 sets of catalyst production equipment. It has a complete fixed-bed catalyst production system, and the production units that can be carried out mainly include: pretreatment of catalyst raw powder, impregnation, molding, drying/roasting, screening and environmental protection treatment, etc., which can meet the production of various fixed-bed catalysts.