Payment & Shipping Terms:
|Specific Surface Area:||≥450||CAS:||1318-02-1|
CAS 1318 02 1 ts 1 zeolite catalyst,
0.2um TS-1 Zeolite,
0.2um ts 1 catalyst
TS-1 Molecular Sieve Ti atoms replace part of aluminum atoms insilicon aluminium molecular sieve and into, which belongs to ZSM-5 series zeolite molecular sieve, with the MFI structure, composed ofsilicon oxygen tetrahedron and titanium oxygen tetrahedron primarystructural unit, connecting through the oxygen bridge, constitute asecondary structure unit of five membered rings, and further to form a three-dimensional porous skeleton, pore structure with two-dimensional MFI molecular sieve, parallel to the a axis of the ten membered ring is in a S shape, aperture of 0.51nm * 0.55nm, ten membered ring and linearly parallel to the b axis direction,aperture of 0.54nm * 0.56nm.
TS-1 Molecular Sieve has a three-dimensional pore structure is composed of two sets of ten membered ring channel and a set of ninemembered ring channel interleaving composition, molar group has become (0.001 ~ 0.2) TiO2: SiO2.
UseTS-1 Molecular Sieve is produced by our company, the averagediameter of 50-60m, minimum close to 10m, the maximum is less than 105m, uniform particle size distribution.TS-1 Molecular Sievecan be used as catalytic oxidation catalyst,is widely used in oxidation, epoxidation and amidoximation reaction.For example, a catalyst for the production of propylene oxide,catalyst for the production of cyclohexanone oxime.
TS-1 titanium silicon molecular sieve
|Index of single digit (SiO2/TiO2)||The molar ratio||25-40|
|The sodium content of||Wt%||0.01%|
|The grain size of||um||0.2-0.4|
|specific surface area m2/g||m2/g||≥450|
|Water content||Wt%||< 2%|
|The reaction performance of amine oxime|
|Raw material conversion rate (%)||≥99.9%|
|The epoxidation reaction performance(%)||≥99%|
|The one-way service life||≥240hour|
|The total life||≥3000hour|
|The properties of epoxy reaction|
|The epoxidation reaction performance(%)||≥99.9%|
|Product selectivity (%)||≥95%|
Our zeoite and catalyst factory are in follow.
The fixed-bed catalyst production project covers an area of about 5,000 square meters and a building area of 2,000 square meters. It is fully equipped with public works and has more than 40 sets of catalyst production equipment. It has a complete fixed-bed catalyst production system, and the production units that can be carried out mainly include: pretreatment of catalyst raw powder, impregnation, molding, drying/roasting, screening and environmental protection treatment, etc., which can meet the production of various fixed-bed catalysts.
Contact Person: Kevin